hwinfo
lshw
Информация об устройствах по протоколу DMI
dmidecode
или с указанием типа устройства:
dmidecode -t <type_id>
Коды устройств (type_id
):
0 BIOS 1 System 2 Base Board 3 Chassis 4 Processor 5 Memory Controller 6 Memory Module 7 Cache 8 Port Connector 9 System Slots 10 On Board Devices 11 OEM Strings 12 System Configuration Options 13 BIOS Language 14 Group Associations 15 System Event Log 16 Physical Memory Array 17 Memory Device 18 32-bit Memory Error 19 Memory Array Mapped Address 20 Memory Device Mapped Address 21 Built-in Pointing Device 22 Portable Battery 23 System Reset 24 Hardware Security 25 System Power Controls 26 Voltage Probe 27 Cooling Device 28 Temperature Probe 29 Electrical Current Probe 30 Out-of-band Remote Access 31 Boot Integrity Services 32 System Boot 33 64-bit Memory Error 34 Management Device 35 Management Device Component 36 Management Device Threshold Data 37 Memory Channel 38 IPMI Device 39 Power Supply
Instead of going with type_id
you can also use keyword with -t
argument to the dmidecode command. Following are the list of available keywords.
Keyword Types ------------------------------ bios 0, 13 system 1, 12, 15, 23, 32 baseboard 2, 10 chassis 3 processor 4 memory 5, 6, 16, 17 cache 7 connector 8 slot 9
Источники:
lspci
lsusb
Подробная информация по модулям DIMM (DDR2,DDR3), часто не работает на ноутбуках.
sudo modprobe eeprom decode-dimms
You can get information about the memory with: lshw -C memory In particular, you can get the clock speed and latency with: lshw -C memory | grep clock